Briggs Stratton Portable Generator 030338 User Manual

Wiring Diagram &  
Schematic  
DANGER  
HAZARD SYMBOLS AND MEANINGS  
Physical contact with energized  
electrical components will result  
in dangerous and possibly fatal  
electrical shock  
SAFETY WARNINGS  
Do not touch bare wires or  
receptacles.  
EXPLOSION  
FIRE  
SHOCK  
Safety Alert Symbols  
WARNING  
The safety alert symbol ( ) is used  
to identify hazards that can result in  
personal injury. A signal word  
(DANGER, WARNING or CAUTION)  
is used with the alert symbol to  
indicate the potential severity of  
injury. In addition, a hazard symbol  
may be used to represent the type  
of hazard.  
DISCONNECT  
SPARK PLUG  
ENTANGLEMENT  
Accidental starting of the unit  
may cause entanglement or  
electrocution  
DANGER  
Generators produce powerful  
voltages. Failure to isolate  
generator from power utility can  
result in death or injury to electric  
utility workers due to  
Where applicable, disconnect the  
negative (-) battery terminal  
Disconnect the spark plug wire.  
DANGER: Indicates a hazard  
which, if not avoided will  
result in death or serious  
injury.  
backfeed of electrical energy.  
Remove the control panel fuse when  
• When testing generators used for backup  
power, notify utility company.  
available.  
WARNING: Indicated a  
hazard which, if not avoided  
could result in death or  
serious injury.  
CAUTION  
IMPORTANT: The measuring  
These wiring diagrams and  
schematics are intended for use  
by trained and qualified electrical  
service technicians who are  
working in a properly equipped  
service environment. Familiarity  
with the proper method of using  
tools, measuring equipment and  
service procedures is essential to  
performing successful  
equipment used in troubleshooting  
this equipment should be of  
industrial quality and should have  
the sensitivity to measure electronic  
values to the third decimal. Its  
CAUTION: Indicates a  
hazard which, if not avoided accuracy should conform with  
might result in death or  
acceptable industry tolerances.  
Ensure that all specified tools  
and/or equipment are available  
before attempting to troubleshoot.  
serious injury.  
troubleshooting and repair of this  
equipment.  
Only qualified electrical technicians  
should attempt to service this  
equipment.  
Rev. 02162007  
 
10000 Watt Portable Generator  
WIRING DIAGRAM  
2
 

Belkin Computer Drive P73261 User Manual
Black Decker Battery Charger BDV090 User Manual
Blaupunkt Car Stereo System Canberra C31 User Manual
Bose Headphones AM329539 User Manual
Bradford White Corp Water Heater 238 47707 00E REV 7 12 User Manual
Briggs Stratton Portable Generator N User Manual
Brother Sewing Machine BE 0901EAC User Manual
Cary Audio Design Stereo Amplifier 2125 User Manual
Casio PDAs Smartphones Pocket PC Terminal User Manual
Casio Watch MA1107 EB User Manual